Symphony Breastpump Troubleshooting
Return to product details
LOW OR NO SUCTION - SYMPHONY BREASTPUMP
- Make sure all connections of kit and breastpump are secure.
- If using a unit with a battery, make sure the battery is charged.
- Make sure membrane is lying flat against valve head. Refer to the assembly instructions.
- Make sure the clear ends of the tubing fit securely into breastshield assemblies and the other ends into the ports on the pump connector or membrane caps.
- In the US, call Medela at 800-435-8316 or 815-363-1166. In Canada, call Medela at 800-435-8316 or 905-608-7272. In other countries, contact your local distributor or the location where you purchased your pump. Visit us on the internet at www.medela.com.
TRAVELING OUTSIDE U.S.
When traveling outside the U.S., use battery power only. Voltage and amperage in different countries may cause permanent damage to your Medela pump and void the warranty.
MILK BACKING UP IN TUBING - SYMPHONY
-
Turn off the pump and unplug from power source.
-
Remove and disassemble the tubing, protective membrane and membrane cap. Wash in soapy water then rinse in cold clear water.
-
Shake water droplets out and hang to air-dry. For faster drying, attach tubings to pump and run pump 1-2 minutes or until dry, or pour a small amount of isopropyl alcohol through the tubings to dry.
-
Make sure that valve membranes are undamaged and clean. Replace if necessary.
-
Use a damp cloth to wipe the pump and the diaphragm. Do not immerse the pump in water.
-
When components are completely dry, reassemble breastpump and kit.
EXPERIENCING DISCOMFORT WHILE PUMPING
If you experience discomfort while pumping contact a breastfeeding
specialist. You may need a larger size PersonalFit™ or SoftFit™
Breastshield to reduce the possibility of nipple irritation or injury. Call
1-800-TELL-YOU to locate a breastfeeding specialist in your area.
CONTACT NUMBERS FOR QUESTIONS AND CONCERNS
PRODUCT IMPROVEMENT SUGGESTIONS
In the US, call Medela at 800-435-8316 or 815-363-1166. In Canada, call Medela at 800-435-8316 or 905-608-7272. In other countries, contact your local distributor or the location where you purchased your pump.
Medela is interested in getting feedback and input on existing and possible future products. Contact Us and check the suggestion box to give us your feedback. Be sure to reference which product or service you are interested in. Thank you for your interest and support of breastfeeding and Medela.
IF CONDENSATION APPEARS IN TUBING
To eliminate condensation after you have completed pumping, continue running the pump with the tubing(s) attached for another 1-2 minutes or until dry.
Return to product details
